Windcave can be setup via Wi-Fi (preference) but also has a SIM fallback.
Instruction to set the Move5000 terminal devices back to Cellular are:
- Restart the terminal (hold FUNC + CLEAR while on its base) and wait for the Windcave logo to appear after the Welcome screen.
- Press CLEAR and enter "5210" when prompted, from there navigate to HOST CONFIG > NETWORK and select 3G.
- Return to the First Menu by pressing CLEAR.
- Next, head to HW CONFIG, if you land at a white screen, press the white button with the black circle.
- From there, select CONTROL PANEL > TERMINAL SETTINGS > COMMUNICATION MEANS > WIFI.
- From here press switch off to disable the wifi.
- Press CANCEL until you land back at the white screen.
- Restart the terminal by holding FUNC + CLEAR while on base and letting it boot normally.
- Once rebooted please press the white button with the black circle to access the menu and press logon.
- If you see a "TOO FREQUENT" error, please allow a few minutes and try again.